Hongkong Xinyuan Xin Co. Ltd.
Postal Code: 510000
Network access: www.keyijin.com
Hot pressing technology
Hot pressing technology (Reference)
Hot pressing process matters needing attention: 1, when pressed, the single diagram should be carried out on inspection, have a look have no shortage of drilling, drilling, drilling drill breakage. No matter how good processing, these problems are more or less, so it can be a check on the clothes before ironing. In these cases, you can use tweezers will reserve hot drilling replace the damaged or drill damaged patch.
2, hot pressing, should first ensure the attachment object (such as clothing fabrics) no dust, no pollution. (used in determining the drilling hot chip octagonal tablet type hot product to decorate your clothes, should first be advanced product testing, to ensure that the products can be firmly attached to the map attached itself).
3, the test parameters of hot ironing ironing: the coat before, should be accurate test pressing pressure, pressing time, pressing temperature. Attached different hot itself, usage of different materials (such as hot drilling, hot chip, octagonal tablets, imported materials and domestic materials, not a drill size), will make the ironing parameters change, so should be tested in ironing, ironing and accurate temperature, time, pressure and other specific ironing parameters.
4, hot pressing, should wait for clothing and drill is to cool slightly, then fix the tape down gently, if found to be connected together by drilling off should carefully analyze the causes.
5, we cannot firmly adhered to the clothes, for several reasons, the correct analysis we can correctly handle: A. with high temperature hurried off cause; B. ironing attached itself has problems (such as smooth leather), ironing attached too much dust or pollution cause; C. drilling hot glue is not strong; no D. drilling rubber soled.
6, a final check: finished ironing, lack of drilling to find such as, application of forceps the same reserve drill flat on the clothes, and then iron in the drilling surface heating. 10 seconds, at the bottom of the melt glue drilling, drilling success.